DC-15A Clone Trooper Rifle

Pardon the orange blaze on the pictured rifle! Was initially needed for "safety" reasons! I'm working to upload more pics soon.
 
Build your own Star Wars DC-15A used by the Clone Troopers! This kit fits a standard 3/4" wooden dowel nice and easily (instead of using weaker printed pins) to help ensure a solid piece when assembled! 
 
This rifle is quite large, 51" in length, and is printed in 6 easy-to-assemble parts, as seen in the 'x-ray' schematic view. I also offer it assembled and painted now as well! Obviously, that takes a little longer! 😁
 
Assembly tips:
Cut the dowel down to 41 inches, and lightly coat it with E6000 glue, letting it set for about 3 minutes prior to sliding on the parts. Put some extra on the end of the part going into the rifle just to help it hold in place on the rear. The front will have just a bit of space in it to accommodate about 1/4", so putting a little extra on the barrel end is a good idea also. But don't put too much! The pieces have just enough space to slide the dowel on (but not come out the sides), so too much in either end piece will make it hard to put all the pieces on! Use clamps or secure the pieces for a good 24 hours for the glue to cure, then paint away!